EMG2926-Q10A User’s Guide
89
CHAPTER 10
LAN
10.1 Overview
This chapter describes how to configure LAN settings.
A Local Area Network (LAN) is a shared communication system to which many computers are
attached. A LAN is a computer network limited to the immediate area, usually the same building or
floor of a building.
Figure 47 LAN Example
The LAN screens can help you configure a manage IP address, and partition your physical network
into logical networks.
10.2 What You Can Do
•Use the IP screen to change the IP address for your EMG2926-Q10A (Section 10.4 on page 90).
•Use the IP Alias screen to have the EMG2926-Q10A apply IP alias to create LAN subnets
(Section 10.5 on page 91).
•Use the IPv6 LAN screen to configure the IPv6 address for your EMG2926-Q10A on the LAN
(Section 10.6 on page 92).
10.3 What You Need To Know
The actual physical connection determines whether the EMG2926-Q10A ports are LAN or WAN
ports. There are two separate IP networks, one inside the LAN network and the other outside the
WAN network as shown next.
To Next Page
Loading...
