ZyXEL Communications EMG2926-Q10A - Configuring Your WLAN and Maintenance Settings; AP Mode Status Screen

Chapter 5 Access Point Mode
EMG2926-Q10A User’s Guide
32
5.3.3 Configuring your WLAN and Maintenance Settings
The configuration of wireless and maintenance settings in Access Point Mode is the same as for
Router Mode.
•See Chapter 9 on page 66 for information on the configuring your wireless network.
•See Chapter 24 on page 164 for information on configuring your Maintenance settings.
5.4 AP Mode Status Screen
Click to open the Status screen.
Figure 15 Status Screen: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 9 Status Screen: Access Point Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.