ZyXEL Communications EMG2926-Q10A - DLNA Screen; SAMBA Screen

Chapter 22 USB Media Sharing
EMG2926-Q10A User’s Guide
155
Note: If your USB device cannot be detected by the EMG2926-Q10A, see the
troubleshooting for suggestions.
22.5 DLNA Screen
Use this screen to have the EMG2926-Q10A act as a DLNA-compliant media server that lets DLNA-
compliant media clients on your network play video, music, and photos from the EMG2926-Q10A
(without having to copy them to another computer). Click Management > USB Media Sharing >
DLNA.
Figure 100 Management > USB Media Sharing > DLNA
The following table describes the labels in this screen.
22.6 SAMBA Screen
Use this screen to set up file-sharing via the EMG2926-Q10A using Windows Explorer or the
workgroup name. You can also configure the workgroup name and create file-sharing user
accounts. Click Management > USB Media Sharing > SAMBA.
Table 59 Management > USB Media Sharing > DLNA
LABEL DESCRIPTION
Enable DLNA Select this to have the EMG2926-Q10A function as a DLNA-compliant media server.
USB1/2 Select the media type that you want to share on the USB device connected to the
EMG2926-Q10A’s USB port.
Rescan Click this button to have the EMG2926-Q10A scan the media files on the connected USB
device and do indexing of the file list again so that DLNA clients can find the new files if
any.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.