Chapter 22 USB Media Sharing
EMG2926-Q10A User’s Guide
156
Figure 101 Management > USB Media Sharing > SAMBA
The following table describes the labels in this screen.
Table 60 Management > USB Media Sharing > SAMBA
LABEL DESCRIPTION
Enable SAMBA Select this to enable file sharing through the EMG2926-Q10A using Windows Explorer or
by browsing to your work group.
Name Specify the name to identify the EMG2926-Q10A in a work group.
Work Group You can add the EMG2926-Q10A to an existing or a new workgroup on your network.
Enter the name of the workgroup which your EMG2926-Q10A automatically joins. You
can set the EMG2926-Q10A’s workgroup name to be exactly the same as the workgroup
name to which your computer belongs to.
Note: The EMG2926-Q10A will not be able to join the workgroup if your local area
network has restrictions set up that do not allow devices to join a workgroup. In this
case, contact your network administrator.
Description Enter the description of the EMG2926-Q10A in a work group.
USB1/2 Specify the user’s access rights to the USB storage device which is connected to the
EMG2926-Q10A’s USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
User Accounts Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
To Next Page
Loading...
