Chapter 19 StreamBoost Management
EMG2926-Q10A User’s Guide
131
The following table describes the labels in this screen.
19.4 Network Screen
Use this screen to view the current upstream and downstream transmission speeds between the
EMG2926-Q10A and the Internet and/or between the EMG2926-Q10A and the connected device(s)
(represented by icons indicating the kind of network device), including those connecting wirelessly.
You can also move your mouse over a device icon to display information about the device.
Click Management > StreamBoost MGMT > Network to open the Network screen.
Table 52 Management > StreamBoost Management > Bandwidth
LABEL DESCRIPTION
Enable
StreamBoost
Select this option to turn on Streamboost management on the EMG2926-Q10A.
Automatic
Bandwidth
Detection
Select this option to control the maximum or minimum amounts of bandwidth that can
be used by traffic.
Up Limit If you select Automatic Bandwidth Detection, this automatically displays the total
amount of bandwidth that you can dedicate to uplink (or outgoing) traffic.
If you don’t select Automatic Bandwidth Detection, set the total amount of
bandwidth that you want to dedicate to uplink (or outgoing) traffic.
This is traffic from LAN/WLAN to WAN.
Down Limit If you select Automatic Bandwidth Detection, this automatically displays the total
amount of bandwidth that you can dedicate to downlink (or incoming) traffic.
If you don’t select Automatic Bandwidth Detection, set the total amount of
bandwidth that you want to dedicate to downlink (or incoming) traffic.
This is traffic from WAN to LAN/WLAN.
Run Bandwidth Test Click Test Bandwidth to determine the maximum bandwidth of your internet
connection.
Enable Automatic
Update
StreamBoost provides a cloud-based service to learn any new type of traffic which is not
in its database and update the table in the EMG2926-Q10A for traffic detection and
policies.
Select this option to have theEMG2926-Q10A automatically receives the StreamBoost
table updates. When there is a new type of traffic which is not in the EMG2926-Q10A’s
table, the EMG2926-Q10A will capture some packets and send them to the StreamBoost
cloud for analysis and database update.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
