Chapter 10 LAN
EMG2926-Q10A User’s Guide
91
Figure 49 Network > LAN > IP
The following table describes the labels in this screen.
10.5 IP Alias Screen
Use this screen to have the EMG2926-Q10A apply IP alias to create LAN subnets. Click LAN > IP
Alias.
Figure 50 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 31 Network > LAN > IP
LABEL DESCRIPTION
IP Address Type the IP address of your EMG2926-Q10A in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your
EMG2926-Q10A will automatically calculate the subnet mask based on the IP address
that you assign. Unless you are implementing subnetting, use the subnet mask
computed by the EMG2926-Q10A.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
Table 32 Network > LAN > IP Alias
LABEL DESCRIPTION
IP Alias 1, 2 Check this to enable IP alias to configure another LAN network for the EMG2926-Q10A.
IP Address Type the IP alias address of your EMG2926-Q10A in dotted decimal notation.
To Next Page
Loading...
