Chapter 9 Wireless LAN
EMG2926-Q10A User’s Guide
80
Figure 38 Network > Wireless LAN 2.4G/5G > More AP
The following table describes the labels in this screen.
9.4.1 More AP Edit
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the More AP screen.
The following screen displays.
Figure 39 Network > Wireless LAN 2.4G/5G > More AP: Edit
Table 23 Network > Wireless LAN 2.4G/5G > More AP
LABEL DESCRIPTION
# This is the index number of each SSID profile.
Status This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).
SSID An SSID profile is the set of parameters relating to one of the EMG2926-Q10A’s BSSs. The
SSID (Service Set IDentifier) identifies the Service Set with which a wireless device is
associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the
wireless client utility.
Security This field indicates the security mode of the SSID profile.
Edit Click the Edit icon to configure the SSID profile.
To Next Page
Loading...
