Chapter 2 Introducing the Web Configurator
EMG2926-Q10A User’s Guide
20
2.3.2 Password Screen
You should see a screen asking you to change your password (highly recommended) as shown
next.
Figure 7 Change Password Screen
The following table describes the labels in this screen.
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes; go to Chapter
24 on page 164 to change this). Simply log back into the EMG2926-Q10A if this
happens.
2.3.2.1 Weather Edit
You can change the temperature unit and select the location for which you want to know the
weather.
Click the icon to change the Weather display.
Figure 8 Change Weather
Table 4 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Retype to Confirm Retype the password for confirmation.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Ignore Click Ignore if you do not want to change the password this time.
To Next Page
Loading...
