ZyXEL Communications EMG2926-Q10A - Login Screen

Chapter 2 Introducing the Web Configurator
EMG2926-Q10A User’s Guide
19
3 The EMG2926-Q10A is in router mode by default. Type "http://192.168.1.1" as the website
address.
If the EMG2926-Q10A is in access point, the IP address is 192.168.1.2. See Chapter 3 on page 22
for more information about the modes of the EMG2926-Q10A.
Your computer must be in the same subnet in order to access this website address.
2.3.1 Login Screen
The Web Configurator initially displays the following login screen.
If you are logging in with the “admin” account, type “1234” (default) as the password.
If you are logging in with the “supervisor” account, type “supervisor” (default) as the password.
Then click Login.
Figure 6 Login screen
The following table describes the labels in this screen.
Table 3 Login screen
LABEL DESCRIPTION
Language Select the language you want to use to configure the Web Configurator.
User Type “supervisor” or "admin" (default) as the user name.
Password Type “supervisor” or "1234" (default) as the password. Click Login.
This shows the current weather, either in celsius or fahrenheit, of the city you specify in
Section 2.3.2.1 on page 20.
This shows the time (hh:mm:ss) and date (yyyy:mm:dd) of the timezone you select in
Section 24.5 on page 166. The time is in 24-hour format, for example 15:00 is 3:00 PM.