ZyXEL Communications EMG2926-Q10A - Account Setup Screen; Time Setting Screen

Chapter 24 Maintenance
EMG2926-Q10A User’s Guide
166
24.4.1 Account Setup Screen
This screen allows you to change a user account password.
In the Maintenance > Account screen, click an Edit icon under Modify. The screen appears as
shown.
Figure 106 Maintenance > Account: Edit
The following table describes the labels in this screen.
24.5 Time Setting Screen
Use this screen to configure the EMG2926-Q10A’s time based on your local time zone. To change
your EMG2926-Q10A’s time and date, click Maintenance > Time. The screen appears as shown.
Group The belonging of the user account.
Modify Click the Edit icon to open the Account Setup screen. Account Setup screen allows to
change the user account password.
Table 64 Maintenance > Account (continued)
LABEL DESCRIPTION
Table 65 Maintenance > Account: Edit
LABEL DESCRIPTION
Username The user account name.
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays as asterisk (*) for each character you type.
Retype to
Confirm
Type the new password again in this field.
Group This shows the group belonging of the user account (read-only).
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to exit this screen without saving.