ZyXEL Communications EMG2926-Q10A - Page 27

Chapter 4 Router Mode
EMG2926-Q10A User’s Guide
27
Figure 11 Navigation Panel: Router Mode
The following table describes the sub-menus.
Table 8 Navigation Panel: Router Mode
LINK TAB FUNCTION
Status This screen shows the EMG2926-Q10A’s general device, system and
interface status information. Use this screen to access the wizard, and
summary statistics tables.
MONITOR
Log Use this screen to view the list of activities recorded by your EMG2926-
Q10A.
DHCP Table Use this screen to view current DHCP client information.
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN 2.4G
Station Status
Use this screen to view the wireless stations that are currently associated
to the EMG2926-Q10A’s 2.4GHz wireless LAN.
WLAN 5G
Station Status
Use this screen to view the wireless stations that are currently associated
to the EMG2926-Q10A’s 5GHz wireless LAN.
CONFIGURATION
Network
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure other advanced properties.