Chapter 8 WAN
EMG2926-Q10A User’s Guide
65
The following table describes the labels in this screen.
Table 16 Network > WAN > Advanced
LABEL DESCRIPTION
Multicast Setup
Multicast Select IGMPv1/v2 to enable multicasting. This applies to traffic routed from the
WAN to the LAN.
Select None to disable this feature. This may cause incoming traffic to be dropped or
sent to all connected network devices.
Auto-Subnet Configuration
Enable Auto-IP-
Change mode
Select this option to have the EMG2926-Q10A change its LAN IP address to 10.0.0.1
or 192.168.1.1 accordingly when the EMG2926-Q10A gets a dynamic WAN IP
address in the same subnet as the LAN IP address 192.168.1.1 or 10.0.0.1.
The NAT, DHCP server and firewall functions on the EMG2926-Q10A are still available
in this mode.
Apply Click Apply to save your changes back to the EMG2926-Q10A.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
