ZyXEL Communications IES-1000 - Relayinfo Enable Command

IES-1000 User’s Guide
DHCP Relay Commands 29-3
29.2.8 Status Command
Syntax:
192.168.1.1 dhcprelay> status
The status command displays whether or not the DHCP relay feature is activated.
29.2.9 Trace Command
Syntax:
192.168.1.1 dhcprelay> trace
The trace command activates trace option(s).
29.2.10 Untrace Command
Syntax:
192.168.1.1 dhcprelay> untrace
The untrace command deactivates trace option(s).
29.2.11 Version Command
Syntax:
192.168.1.1 dhcprelay> version
The version command displays the DHCP software version.
29.3 DHCP Relay Agent Information Option
Use the following commands to configure the DHCP relay agent information option feature.
29.3.1 Relayinfo Enable Command
Syntax:
192.168.1.1 dhcprelay> relayinfo enable
The relayinfo enable command turns on the DHCP relay agent information (Option 82) feature.
29.3.2 Relayinfo Disable Command
Syntax: