ZyXEL Communications IES-1000 - Installing a Network Module

IES-1000 User’s Guide
5-2 Removing and Installing Network Modules
Figure 5-3 Removing a Network Module from the IES-1000 Chassis
5.2 Installing a Network Module
Step 1. Hold the module with the network ports facing you and insert it into an empty slot located on the front
of the IES-1000 as shown next.
Step 2. Push the bottom of the front of the module into the IES-1000. The front of the module should be flush
with the IES-1000 chassis.