ZyXEL Communications IES-1000 - Radius Port Command; Radius Secret Command; Radius Show Command

IES-1000 User’s Guide
30-4 IEEE 802.1X Commands
<addr> =
The IP address of the external RADIUS server.
This command sets the external RADIUS server IP address.
30.2.12 RADIUS Port Command
Syntax:
192.168.1.1 dot1x> radius port <portnum>
where
<portnum> =
The UDP port number of the external RADIUS server.
This command sets the external RADIUS server UDP port number.
30.2.13 RADIUS Secret Command
Syntax:
192.168.1.1 dot1x> radius secret <secret>
where
<secret> =
A password (up to 31 alphanumeric characters) to be shared between the
external RADIUS server and the IES-1000. This key is not sent over the
network. This key must be the same on the external RADIUS server and the
IES-1000.
This command sets the authentication and encryption key.
30.2.14 RADIUS Show Command
Syntax:
192.168.1.1 dot1x> radius show
This command displays the external RADIUS server settings.