ZyXEL Communications IES-1000 - ADSL Ports (AAM1008); Ethernet Port; Other Factory Defaults

IES-1000 User’s Guide
2-2 Factory Default Settings
• Enable/Disable State: Disabled
• Profile: DEFVAL
 Maximum upstream/downstream speed: 2304 Kbps
 Minimum upstream/downstream speed: 192 Kbps
2.6 ADSL Ports (AAM1008)
• Encapsulation: RFC 1483
• Multiplexing: LLC-based
• VPI: 0
• VCI: 33
• Enable/Disable State: Disabled
• Operational Mode: auto
• Profile: DEFVAL
 Maximum Upstream Rate: 512 Kbps
 Maximum Downstream Rate: 2048 Kbps
2.7 Ethernet Port
The factory default settings for the Ethernet port of the IES-1000 are:
• Auto-negotiation: ON
• Speed used with auto-negotiation OFF: 100Mbps
• Duplex mode used with auto-negotiation OFF: half duplex
2.8 Other Factory Defaults
• MAC filter: Disabled
• MAC count filter: Disabled
• Secured Host: Disabled
• Sys Error Log: Always Enabled
• UNIX Syslog: Disabled
• IEEE 802.1Q Tagged VLAN: Disabled
• IGMP Snooping: Enabled (Unknown-flood)
• DHCP Relay: Disabled
• IEEE 802.1X Port-based Authentication: Disabled