ZyXEL Communications IES-1000 - Figure 26-6 Channel Statistics Command Example; Clear Channel Command; Clear Channels Command

IES-1000 User’s Guide
Virtual Channel Management 26-9
Figure 26-6 Channel Statistics Command Example
26.3.12 Clear Channel Command
Syntax:
192.168.1.1 adsl> clear ch <port> <vpi> <vci>
where
<port> =
A port number (1 to 8) or (*) means all 8 ports.
<vpi> =
The VPI setting (0 to 255).
<vci> =
The VCI setting (32 to 65535 if vpi = 0) or (1 to 65535 if the vpi does not = 0).
The
clear ch command erases the statistics of the specified PVC channel.
The following example erases the statistics for the PVC channel for port 8 that uses VPI 0 and VCI 33.
192.168.1.1 adsl> clear ch 8 0 33
26.3.13 Clear Channels Command
Syntax:
192.168.1.1 adsl> clear chs [<start port> [<stop port>]]
where
<start port> =
The first port number in a range of ports for which you want to display line
information. 1 is used if you leave this blank.
<stop port> =
The last port number in a range of ports for which you want to display line
information. 8 is used if you leave this blank.
The
clear chs command erases the statistics of the PVC channels for the specified ports.
The following example erases the statistics for the PVC channels for ports 5 to 8.
192.168.1.1 adsl> clear chs 5 8
192.168.1.1 adsl> stat chs 5 8
PORT VPI VCI TX pkts RX pkts TXrate RXrate TX cells RX cells
( B/s ) ( B/s )
----+----+----+----------+----------+--------+--------+----------+----------
5 8 33 0 0 0 0 0 0
6 0 33 0 0 0 0 0 0
7 0 33 0 0 0 0 0 0
8 0 33 0 0 0 0 0 0