ZyXEL Communications IES-1000 - Getting Started Screens; Getting Started Overview; General Setup Screen

IES-1000 User’s Guide
Getting Started Screens 10-1
This chapter explains the General Setup and Bridge Setup screens.
10.1 Getting Started Overview
The web configurator allows you to configure basic settings using the Getting Started screens.
10.2 General Setup Screen
Click General Setup in the navigation panel to open this screen.
Use this screen to set up general identification information for the IES-1000.
Figure 10-1 General Setup
The following table describes this screen.
Table 10-1 General Setup
LABEL DESCRIPTION
System Name Type a descriptive name for identification purposes. This name can be up to 31
alphanumeric characters long.
Location Type the geographic location (up to 31 characters) of your IES-1000.
Contact Person's
Name
Type the name (up to 31 characters) of the person in charge of this IES-1000.
Chassis ID Type a chassis ID number from 1 to 64. The chassis ID helps to keep track of this individual
unit in a multiple unit application.
Chapter 10
Getting
Started Screens