ZyXEL Communications IES-1000 - List Bonded Members Command

IES-1000 User’s Guide
25-16 G.SHDSL Commands
25.3.31 List Bonded Members Command
Syntax:
192.168.1.1 gshdsl> list bond
The list bond command displays all of the bonded members.
An example is shown next.
192.168.1.1 gshdsl> list bond
Port-bonding configuration:
Bonding name Mode Member list
-------------------------------+-------------+-------------------------------
c1 2-wire STU-C port 2-4 8
This displays the members that have been bound together in order to form a logical link.