EasyManua.ls Logo

ZyXEL Communications IES4005M - Page 110

ZyXEL Communications IES4005M
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 13 Switch Features
IES4005M User’s Guide
110
acl <acl-profile>
Use the specified ACL profile for the ports. C 13
no acl <acl-profile>
Do not use the specified ACL profile for the ports. C 13
acl-profile <name>
Creates an ACL profile and enters the sub-command mode for
configuring it.
name: up to 31 printable characters
C13
Use the following sub-commands to set the rules for the ACL profile.
ether-type <etype>
Specifies an Ethernet type.
etype: Ethernet type in hexadecimal (0000-FFFF).
C13
source-mac <mac>
Specifies a source MAC. C 13
dest-mac <mac>
Specifies a destination MAC. C 13
source-oui <oui>
Specifies a source MAC Organization Unit Identifier (OUI).
oui: 00:00:00-FF:FF:FF
C13
dest-oui <oui>
Specifies a destination MAC Organization Unit Identifier (OUI). C 13
inner-vlan <vid>
Specifies an inner VLAN ID. C 13
outer-vlan <vid>
Specifies an outer VLAN ID. C 13
inner-pbit <pbit>
Specifies an inner VLAN priority bit.
pbit: 0-7
C13
outer-pbit <pbit>
Specifies an outer VLAN priority bit. C 13
source-ip range <ip>/<mask>
Specifies a source IP range.
mask: 16-32
C13
dest-ip range <ip>/<mask>
Specifies a destination IP range. C 13
source-ip <ip>
Specifies a source IP address. C 13
dest-ip <ip>
Specifies a destination IP address. C 13
protocol <protocol>
Specifies an IP protocol.
protocol: 0-255
C13
ip-precedence <precedence>
Specifies an IP precedence.
precedence: 0-7
C13
dscp <dscp>
Specifies an IP DSCP.
dscp: 0-63
C13
source-ipv6 <ipv6>
Specifies a source IPv6 address. C 13
dest-ipv6 <ipv6>
Specifies a destination IPv6 address. C 13
next-header <next-header>
Specifies an IPv6 next header.
next-header: 0 ~ 255
C13
traffic-class <traffic-class>
Specifies an IPv6 traffic class.
traffic-class: 0 ~ 255
C13
source-l4-port range <start-
port> <end-port>
Specifies a layer 4 source port range.
start-port: 0-65535
end-port: 0-65535
C13
Table 75 ACL Commands Summary (continued)
COMMAND DESCRIPTION M P

Table of Contents

Related product manuals