ZyXEL Communications IES4005M - Page 159

Chapter 22 QoS
IES4005M User’s Guide
159
queue1 max-rate <rate>
depth <depth>
Configures the maximum rate queue 1 allows. C 13
queue0 max-rate <rate>
depth <depth>
Configures the maximum rate queue 0 allows. C 13
no qos shaping-profile <name>
Removes the specified shaping profile. C 13
show qos shaping-profile
[name]
Displays all shaping profiles or the specified one. C 13
qos wrr-wfq-profile <name>
Enters the sub-command mode for configuring the specified WRR/WFQ
profile.
C13
exit
Leaves the shaping profile sub-command mode. C 13
queue7 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 7
allows.
C13
queue6 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 6
allows.
C13
queue5 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 5
allows.
C13
queue4 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 4
allows.
C13
queue3 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 3
allows.
C13
queue2 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 2
allows.
C13
queue1 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 1
allows.
C13
queue0 weight <weight>
depth <depth>
Configures the weight and maximum number of packets queue 0
allows.
C13
no qos wrr-wfq-profile <name>
Removes the specified WRR/WFQ profile. C 13
show qos wrr-wfq-profile
[name]
Displays all WRR/WFQ profiles or the specified one. E 13
qos queue-mapping
Enters the sub-command mode for configuring priority bit (pbit) to
queue mapping.
C13
exit
Leaves the pbit to queue mapping sub-command mode. C 13
pbit7 <queue-id>
Maps pbit 7 to the specified queue. C 13
pbit6 <queue-id>
Maps pbit 6 to the specified queue. C 13
pbit5 <queue-id>
Maps pbit 5 to the specified queue. C 13
pbit4 <queue-id>
Maps pbit 4 to the specified queue. C 13
pbit3 <queue-id>
Maps pbit 3 to the specified queue. C 13
pbit2 <queue-id>
Maps pbit 2 to the specified queue. C 13
pbit1 <queue-id>
Maps pbit 1 to the specified queue. C 13
pbit0 <queue-id>
Maps pbit 0 to the specified queue. C 13
show qos queue-mapping
Displays the pbit to queue ID mapping. E 13
qos vc-shaping-profile <name>
Enters the sub-command mode for configuring a VC shaping profile. C 13
exit
Leaves the VC shaping profile sub-command mode. C 13
Table 110 QoS Commands Summary (continued)
COMMAND DESCRIPTION M P