ZyXEL Communications IES4005M - Page 174

Chapter 24 VDSL
IES4005M User’s Guide
174
dbpo-epsd <psdid>
Configures the DBPO standard PSB mask (used for VDSL2
protocol).
psdid: 1-6. 1: psd_co, 2: psd-flat, 3: psd_cab_ansi, 4:
psd_cab_etsi, 5: psd_exch_etsi, 6:psd_exch_ansi
C13
upbo-kl <kl>
Configures the Upstream Power Back Off (UPBO) electrical length
(used for VDSL2 protocol).
kl: 0 .. 1280 in 0.1 dB
default: 0
C13
upbo-klf auto|override
Configures the UPBO force mode (used for VDSL2 protocol).
auto: DSL autonomously determines the electrical length
override: force to utilize configured UPBO kl as electrical length
default: disable
C13
no upbo-klf
Disables UPBO (used for VDSL2 protocol). C 13
upbo-psd-a <psd-a>
Configures UPBO referenced PSD parameter A (used for VDSL2
protocol).
psd-a: 4000-8095 in 0.01 dBm/Hz
C13
upbo-psd-b <psd-b>
Configures UPBO referenced PSD parameter B.
psd-b: 0-4095 in 0.01 dBm/Hz
C13
vdsl2-profile
<vdsl2_profile_list>
Configures the list of allowed VDSL2 profiles (used for VDSL2
protocol).
vdsl2_profile_list: list of (8a, 8b, 8c, 8d, 12a, 12b, 17a,
30a)
default: 8a,8b,8c,8d,12a,12b,17a
C13
limit-mask <limit-mask>
Configures the standard PSD mask.
limit-mask: d32, d48, d64, d128, b7-1 to b7-10, b8-1 to b8-16
default: d32
C13
us0-band
Enables the upstream band 0 (used for VDSL2 protocol). C 13
no us0-band
Disables the upstream band 0 (used for VDSL2 protocol). C 13
us0-mask <us0-mask>
Configures standard upstream band 0 PSD mask.
us0-mask: eu32, eu36, eu40, eu44, eu48, eu52, eu56, eu60,
eu64, or eu128
default: eu32
C13
transmission-type <type-list>
Configures the allowed DSL modes.
type-list: list of vdsl2, adsl2+, adsl2, gdmt, t1413, glite,
annex-m, annex-l, and annex-j
C13
no dsl alarm-line-profile <name>
Removes the specified DSL alarm line profile. C 13
show dsl alarm-line-profile
<name>
Displays the contents of the specified DSL alarm line profile. E 13
dsl alarm-line-profile <name>
Enters the sub-command mode for configuring the specified DSL
alarm line profile.
C13
exit
Leaves the DSL alarm line profile configuration sub-command
mode.
C13
Table 116 VDSL Commands Summary (continued)
COMMAND DESCRIPTION M P