ZyXEL Communications IES4005M - Page 175

Chapter 24 VDSL
IES4005M User’s Guide
175
xtuc-15min-fecs-threshold
<threshold>
Configures the number of Forward Error Correction Seconds
(FECS) allowed on the system within 15 minutes. 0-900, default:
0.
C13
xtuc-15min-es-threshold
<threshold>
Configures the number of Errored Seconds (ES) allowed on the
system within 15 minutes. 0-900, default: 0.
C13
xtuc-15min-lofs-threshold
<threshold>
Configures the number of Loss of Frame Seconds (LOFS) allowed
on the system within 15 minutes. 0-900, default: 0.
C13
xtuc-15min-lprs-threshold
<threshold>
Configures the number of Loss of Power Seconds (LPRS) allowed
on the system within 15 minutes. 0-900, default: 0.
C13
xtuc-15min-ses-threshold
<threshold>
Configures the number of Severely Errored Seconds (SES) allowed
on the system within 15 minutes. 0-900, default: 0.
C13
xtuc-15min-loss-threshold
<threshold>
Configures the number of Loss of Signal Seconds (LoSS) allowed
on the system within 15 minutes. 0-900, default: 0.
C13
xtuc-15min-uas-threshold
<threshold>
Configures the number of UnAvailable Seconds (UAS) errors
allowed on the system within 15 minutes. 0-900, default: 0.
C13
xtur-15min-fecs-threshold
<threshold>
Configures the number of Forward Error Correction Seconds
(FECS) allowed on subscriber devices within 15 minutes. 0-900,
default: 0.
C13
xtur-15min-es-threshold
<threshold>
Configures the number of Errored Seconds (ES) allowed on
subscriber devices within 15 minutes. 0-900, default: 0.
C13
xtur-15min-lofs-threshold
<threshold>
Configures the number of Loss of Frame Seconds (LOFS) allowed
on subscriber devices within 15 minutes. 0-900, default: 0.
C13
xtur-15min-lprs-threshold
<threshold>
Configures the number of Loss of Power Seconds (LPRS) allowed
on subscriber devices within 15 minutes. 0-900, default: 0.
C13
xtur-15min-ses-threshold
<threshold>
Configures the number of Severely Errored Seconds (SES) allowed
on subscriber devices within 15 minutes. 0-900, default: 0.
C13
xtur-15min-loss-threshold
<threshold>
Configures the number of Loss of Signal Seconds (LoSS) allowed
on subscriber devices within 15 minutes. 0-900, default: 0.
C13
xtur-15min-uas-threshold
<threshold>
Configures the number of UnAvailable Seconds (UAS) errors
allowed on subscriber devices within 15 minutes. 0-900, default:
0.
C13
15min-failed-full-init-
threshold <threshold>
Configures the number of times a full initialization is allowed to fail
on subscriber devices within 15 minutes. 0-2147483647, default:
0.
C13
no dsl alarm-channel-profile
<name>
Removes the specified DSL alarm channel profile. C 13
show dsl alarm-channel-profile
[name]
Displays the names of all the DSL alarm channel profiles if a name
is not specified or the contents of the specified DSL alarm channel
profile.
E13
dsl alarm-channel-profile <name>
Enters the sub-command mode for configuring the specified DSL
alarm channel profile.
C13
exit
Leaves the DSL alarm channel profile configuration sub-command
mode.
C13
xtuc-15min-errcoding-
threshold <threshold>
Configures the number of Code Violations (incorrect cyclic
redundancy check) allowed on the system within 15 minutes. 0-
2147483647, default: 0.
C13
xtuc-15min-corrected-
threshold <threshold>
Configures the number of corrected error blocks allowed on the
system within 15 minutes. 0- 2147483647, default: 0.
C13
Table 116 VDSL Commands Summary (continued)
COMMAND DESCRIPTION M P