EasyManua.ls Logo

ZyXEL Communications NXC Series - AP Mode Radio Information

ZyXEL Communications NXC Series
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6 Monitor
NXC Series User’s Guide
103
The following table describes the icons in this screen.
6.12.1 AP Mode Radio Information
This screen allows you to view detailed information about a selected radio’s SSID(s), wireless traffic and
wireless clients for the preceding 24 hours. To access this window, select an entry and click the More
Information button in the Radio List screen.
Channel ID This indicates the radio’s channel ID.
Transmit Power This shows the radio’s output power (in dBm).
Station This displays the number of stations (aka wireless clients) associated with the radio.
Upload This displays the total number of bytes received by the radio.
Download This displays the total number of bytes transmitted by the radio.
Model This displays the model of the AP to which the radio belongs.
MAC Address This displays the MAC address of the radio.
Radio This indicates the radio number on the AP to which it belongs.
OP Mode This indicates the radio’s operating mode. Operating modes are AP (access point), MON
(monitor), Root AP or Repeater.
AP / ZyMesh
Profile
This indicates the AP radio and ZyMesh profile names to which the radio belongs.
Antenna This indicates the antenna orientation for the radio (Wall or Ceiling).
This shows N/A if the AP does not allow you to adjust coverage depending on the orientation of
the antenna for each radio using the web configurator or a physical switch.
Channel
Utilization
This indicates how much IEEE 802.11 traffic the AP radio can receive on the channel. It displays
what percentage of the radio’s channel is currently being used.
Refresh Click this button to update the information in the screen.
Table 45 Monitor > Wireless > AP Information > Radio List Icons
LABEL DESCRIPTION
When an AP is being load balanced, this icon means it is operating over the maximum
allocated bandwidth.
When an AP is being load balanced, this icon means it is operating under the maximum
allocated bandwidth.
Table 44 Monitor > Wireless > AP Information > Radio List (continued)
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications NXC Series

Related product manuals