ZyXEL Communications NXC Series - SSID Info

Chapter 6 Monitor
NXC Series User’s Guide
106
The following table describes the labels in this screen.
6.14 SSID Info
Use this screen to view the number of wireless clients currently connected to an SSID and the security
type used by the SSID. Click Monitor > Wireless > SSID Info to access this screen.
Table 47 Monitor > Wireless > ZyMesh > ZyMesh Link Info
LABEL DESCRIPTION
Hide/Show
Advanced
Settings
Click this button to display a greater or lesser number of configuration fields.
ZyMesh Link Info
Enable Column
Freeze
Select the check box to freeze the first column (#) so it will be always visible when you scroll
through the list. Clear the check box to unfreeze the column.
# This is the index number of the managed AP (in repeater mode) in this list.
Description This is the descriptive name of the managed AP (in repeater mode).
IP Address This is the IP address of the managed AP (in repeater mode).
Channel ID This is the number of the channel used by the managed AP (in repeater mode).
Hop This is the hop count of the managed AP. For example, “1” means the managed AP is
connected to a root AP directly. “2” means there is another repeater AP between the
managed AP and the root AP.
Uplink AP Info This shows the role and descriptive name of the managed AP to which this managed AP is
connected wirelessly.
SSID Name This indicates the name of the wireless network (SSID) the managed AP uses to associated with
another managed AP.
Signal Strength Before the slash, this shows the signal strength the uplink AP (a root AP or a repeater) receives
from this managed AP (in repeater mode).
After the slash, this shows the signal strength this managed AP (in repeater mode) receives from
the uplink AP.
Link Up Time This displays the time the managed AP last associated with the root AP or repeater.
MAC Address This is the MAC address of the managed AP (in repeater mode).
Transmit Power This is the output power of the managed AP (in repeater mode).
Root AP This is the descriptive name of the root AP to which the managed AP is connected wirelessly.
Rx Rate This is the maximum reception rate of the root AP or repeater to which the managed AP is
connected.
Tx Rate This is the maximum transmission rate of the root AP or repeater to which the managed AP is
connected.
Refresh Click this button to update the information in the screen.