Chapter 6 Monitor
NXC Series User’s Guide
81
6.8 Login Users
Use this screen to look at a list of the users currently logged into the NXC. To access this screen, click
Monitor > System Status > Login Users.
Figure 46 Monitor > System Status > Login Users
The following table describes the labels in this screen.
# This is the index number of an IP/MAC binding entry.
IP Address This is the IP address that the NXC assigned to a device.
Host Name This field displays the name used to identify this device on the network (the computer name).
The NXC learns these from the DHCP client requests.
MAC Address This field displays the MAC address to which the IP address is currently assigned.
Last Access This is when the device last established a session with the NXC through this interface.
Description This field displays the descriptive name that helps identify the entry.
Refresh Click this button to update the information in the screen.
Table 30 Monitor > System Status > IP/MAC Binding (continued)
LABEL DESCRIPTION
Table 31 Monitor > System Status > Login Users
LABEL DESCRIPTION
Current User List
Force Logout Select a user ID and click this icon to end a user’s session.
# This field is a sequential value and is not associated with any entry.
User ID This field displays the user name of each user who is currently logged into the NXC.
For a MAC authentication login, this field displays the MAC address of the user’s computer.
Reauth/Lease
Time
This field displays the amount of reauthentication time remaining and the amount of lease time
remaining for each user. See Chapter 18 on page 238.
Associated AP This field displays the description of the managed AP through which the user logs into the NXC.
The default description is “AP-” followed by the AP’s MAC address. A “-” displays if the user is
not connecting to the NXC wirelessly.
Type This field displays the way the user logged in to the NXC.
To Next Page
Loading...
