NXC Series User’s Guide
69
CHAPTER 6
Monitor
6.1 Overview
Use the Monitor screens to check status and statistics information.
6.1.1 What You Can Do in this Chapter
• The Port Statistics screen (Section 6.3 on page 71) displays packet statistics for each physical port.
• The Port Statistics Graph screen (Section 6.3.1 on page 72) displays a line graph of packet statistics for
each physical port.
• The Interface Status screen (Section 6.4 on page 73) displays all of the NXC’s interfaces and their
packet statistics.
•The Traffic Statistics screen (Section 6.5 on page 75) allows you to start or stop data collection and
view statistics.
• The Session Monitor screen (Section 6.6 on page 78) displays sessions by user or service.
• The IP/MAC Binding screen (Section 6.7 on page 80) displays lists of the devices that have received
an IP address from NXC interfaces with IP/MAC binding enabled.
• The Login Users screen (Section 6.8 on page 81) displays a list of the users currently logged into the
NXC.
• The Login Users > Dynamic Guest screen (Section 6.8.1 on page 82) displays a list of the guest user
accounts, which are created automatically and allowed to access the NXC’s services for a certain
period of time.
• The Login Users > Trusted MAC Address screen (Section 6.8.2 on page 83) displays a list of MAC
addresses, which are authenticated and allowed to access the network.
• The USB Storage screen (Section 6.9 on page 84) displays information about a connected USB storage
device.
• The Ethernet Neighbor screen (Section 6.10 on page 85) displays the NXC’s neighboring devices in
one place.
• The AP List screen (Section 6.11 on page 86) displays which APs are currently connected to the NXC.
• The Radio List screen (Section 6.12 on page 102) displays statistics about the wireless radio transmitters
in each of the APs connected to the NXC.
• The ZyMesh Link Info screen (Section 6.13 on page 105) displays statistics about the ZyMesh
connections between the managed APs.
• The SSID Info screen (Section 6.14 on page 106) displays the number of wireless clients that are
currently connected to an SSID and the SSID’s security mode.
• The Station List screen (Section 6.15 on page 107) displays statistics pertaining to the connected
stations (or “wireless clients”).
• The Detected Device screen (Section 6.16 on page 109) displays the wireless devices passively
detected by the NXC.
To Next Page
Loading...
