ZyXEL Communications NXC Series - Add;Edit RADIUS; Radius

Chapter 25 AAA Server
NXC Series User’s Guide
309
25.3 RADIUS
Use the RADIUS screen to manage the list of RADIUS servers the NXC can use in authenticating users.
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen.
Figure 183 Configuration > Object > AAA Server > RADIUS
The following table describes the labels in this screen.
25.3.1 Add/Edit RADIUS
Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Click the Add icon or
an Edit icon to display the following screen. Use this screen to create a new entry or edit an existing one.
OK Click OK to save the changes.
Cancel Click Cancel to discard the changes.
Table 149 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add/Edit (continued)
LABEL DESCRIPTION
Table 150 Configuration > Object > AAA Server > RADIUS
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it before
doing so.
Object
References
Select an entry and click Object References to open a screen that shows which settings use the
entry.
# This field displays the index number.
Name This is the name of the RADIUS server entry.
Server Address This is the address of the AD or LDAP server.