Chapter 6 Monitor
NXC Series User’s Guide
113
The Web Configurator saves the filter settings if you leave the View Log screen and return to it later.
6.18 View AP Log
Use this screen to view the NXC’s current wireless AP log messages. Click Monitor > Log > View AP Log to
access this screen.
Figure 65 Monitor > Log > View AP Log
The following table describes the labels in this screen.
Destination This field displays the destination IP address and the port number of the event that generated
the log message.
Note This field displays any additional information about the log message.
Table 51 Monitor > View Log (continued)
LABEL DESCRIPTION
Table 52 Monitor > Log > View AP Log
LABEL DESCRIPTION
Show/Hide Filter Click this to show or hide the AP log filter.
AP Selection
Select an AP Select an AP from the list and click Query to view its log messages.
To Next Page
Loading...
