Chapter 6 Monitor
NXC Series User’s Guide
71
6.3 Port Statistics
Use this screen to look at packet statistics for each Gigabit Ethernet port. To access this screen, click
Monitor > System Status > Port Statistics.
Figure 40 Monitor > System Status > Port Statistics
The following table describes the labels in this screen.
Table 24 Monitor > System Status > Port Statistics
LABEL DESCRIPTION
General Settings
Poll Interval Enter how often you want this window to be updated automatically, and click Set Interval.
Set Interval Click this to set the Poll Interval the screen uses.
Stop Click this to stop the window from updating automatically. You can start it again by setting the
Poll Interval and clicking Set Interval.
Statistics Table
Switch to Graphic
View
Click this to display the port statistics as a line graph.
# This field displays the port’s number in the list.
Port This field displays the physical port number.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and duplex
setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the NXC on the physical port since it
was last connected.
RxPkts This field displays the number of packets received by the NXC on the physical port since it was
last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx B/s This field displays the transmission speed, in bytes per second, on the physical port in the one-
second interval before the screen updated.
To Next Page
Loading...
