Chapter 6 Monitor
NXC Series User’s Guide
111
6.17 View Log
Log messages are stored in two separate logs, one for regular log messages and one for debugging
messages. In the regular log, you can look at all the log messages by selecting All Logs, or you can
select a specific category of log messages (for example, user). You can also look at the debugging log
by selecting Debug Log. All debugging messages have the same priority.
To access this screen, click Monitor > Log. The log is displayed in the following screen.
Note: When a log reaches the maximum number of log messages, new log messages
automatically overwrite existing log messages, starting with the oldest existing log
message first.
• For individual log descriptions, see Appendix A on page 436.
• For the maximum number of log messages in the NXC, see the datasheet.
Events that generate an alert (as well as a log message) display in red. Regular logs display in black.
Click a column’s heading cell to sort the table entries by that column’s criteria. Click the heading cell
again to reverse the sort order.
Figure 64 Monitor > View Log
Last Seen This indicates the last time the device was detected by the AP.
Refresh Click this to refresh the items displayed on this page.
Table 50 Monitor > Wireless > Detected Device (continued)
LABEL DESCRIPTION
To Next Page
Loading...
