ZyXEL Communications NXC Series - Add;Edit Dynamic Guest Group; User Aware Login Example

Chapter 18 User/Group
NXC Series User’s Guide
251
18.4.2 Add/Edit Dynamic Guest Group
This screen allows you to create a dynamic guest group or edit an existing one. To access this screen, go
to the Configuration > Object > User/Group > Setting screen, and click either the Add icon or an Edit
icon in the Dynamic Guest Group section.
Figure 144 User/Group > Setting > Add/Edit Dynamic Guest Group
The following table describes the labels in this screen.
18.4.3 User Aware Login Example
Access users cannot use the Web Configurator to browse the configuration of the NXC. Instead, after
access users log into the NXC, the following user aware login screen appears.
Figure 145 User Aware Login
Table 116 User/Group > Setting > Add/Edit Dynamic Guest Group
LABEL DESCRIPTION
Name Specify the name used to identify the dynamic guest group.
Description Enter a description for the dynamic guest group.
OK Click OK to save your changes back to the NXC.
Cancel Click Cancel to exit this screen without saving your changes.