Chapter 12 NAT
NXC Series User’s Guide
190
Figure 101 Configuration > Network > NAT
The following table describes the labels in this screen.
12.2.1 Add/Edit NAT
This screen lets you create new NAT rules and edit existing ones. To open this window, open the NAT
summary screen. Then, click on an Add icon or Edit icon to open the following screen.
Table 83 Configuration > Network > NAT
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific entry.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the entry.
Mapping Type This field displays what kind of NAT this entry performs: Virtual Server, 1:1 NAT, or Many 1:1 NAT.
Interface This field displays the interface on which packets for the NAT entry are received.
Original IP This field displays the original destination IP address (or address object) of traffic that matches
this NAT entry. It displays any if there is no restriction on the original destination IP address.
Mapped IP This field displays the new destination IP address for the packet.
Protocol This field displays the service used by the packets for this NAT entry. It displays any if there is no
restriction on the services.
Original Port This field displays the original destination port(s) of packets for the NAT entry. This field is blank
if there is no restriction on the original destination port.
Mapped Port This field displays the new destination port(s) for the packet. This field is blank if there is no
restriction on the original destination port.
Apply Click this button to save your changes to the NXC.
Reset Click this button to return the screen to its last-saved settings.
To Next Page
Loading...
