NXC Series User’s Guide
116
CHAPTER 7
Registration
7.1 Overview
Use the Configuration > Licensing > Registration screens to register your NXC and manage its service
subscriptions.
7.1.1 What You Can Do in this Chapter
• The Registration screen (Section 7.2 on page 117) registers your NXC with myZyxel.com.
• The Service screen (Section 7.3 on page 117) displays the status of your service registrations and
upgrade licenses.
7.1.2 What you Need to Know
This section introduces the topics covered in this chapter.
myZyxel.com
myZyxel.com is Zyxel’s online service center where you can register your NXC and manage subscription
services available for the NXC. To use a subscription service, you have to register the NXC and activate
the corresponding service at myZyxel.com (through the NXC).
Note: You need to create a myZyxel.com account before you can register your device and
activate the services at myZyxel.com.
Go to http://portal.myZyxel.com with the NXC’s serial number and LAN MAC address to register it. Refer
to the web site’s on-line help for details.
Note: To activate a service on an NXC, you need to access myZyxel.com via that NXC.
Maximum Number of Managed APs
The NXC is configured to support a certain number of managed APs that can be increased by
purchasing additional licenses. The number of APs that the NXC can support is shown on Table 1 on
page 19.
Maximum Number of ZyMesh Root APs
The NXC by default allows up to one ZyMesh root AP, which means only one radio of the managed AP
can be set to root AP mode. Buy a ZyMesh license to have more root APs.
To Next Page
Loading...
