Chapter 29 System
NXC Series User’s Guide
367
29.11 SNMP
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your NXC supports SNMP agent functionality, which allows a manager
station to manage and monitor the NXC through the network. The NXC supports SNMP version one
(SNMPv1), version two (SNMPv2c) and version three (SNMPv3). The next figure illustrates an SNMP
management operation.
Figure 224 SNMP Management Model
An SNMP managed network consists of two main types of component: agents and a manager.
# This the index number of the service control rule.
The entry with a hyphen (-) instead of a number is the NXC’s (non-configurable) default policy.
The NXC applies this to traffic that does not match any other configured rule. It is not an
editable rule. To apply other behavior, configure a rule that traffic will match so the NXC will not
have to use the default policy.
Zone This is the zone on the NXC the user is allowed or denied to access.
Address This is the object name of the IP address(es) with which the computer is allowed or denied to
access.
Action This displays whether the computer with the IP address specified above can access the NXC
zone(s) configured in the Zone field (Accept) or not (Deny).
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
Table 177 Configuration > System > FTP (continued)
LABEL DESCRIPTION
To Next Page
Loading...
