ZyXEL Communications NXC Series - Redirect on Controller

Chapter 15 Captive Portal
NXC Series User’s Guide
216
15.4 Redirect on Controller
This screen allows you to configure the authentication policy rules for traffic that goes through the
controller (NXC).
To set a captive portal authentication policy rule for traffic that comes from the managed AP’s WiFi
clients and is not forwarded to the NXC, go to the Captive Portal > Redirect on AP screen.
Click Configuration > Captive Portal > Redirect on Controller to access this screen.
Figure 126 Configuration > Captive Portal > Redirect on Controller
mpldx V V V V
auth_min The remaining minutes before
authentication timeout
V
auth_sec The remaining seconds before
authentication timeout
V
lease_time Total remaining seconds before lease
timeout
V
username Login username V
cgi_str The CGI for user login. The admin type
is “admin.cgi” and the user related
type is “login.cgi”.
V
Ses_time Accounting session timeout V
qrcode_gw_a
ddr
The NXC’s IP address which can be
accessed by the Authenticator
V
client_ip The IP address of the client that
authenticates with a QR code
V
Table 96 HTTP Parameters for External URL
PARAMETER DESCRIPTION LOGIN WELCOME SESSION LOGOUT ERROR