Chapter 21 ZyMesh Profile
NXC Series User’s Guide
285
In the following example, managed APs 1 and 2 act as a root AP and managed APs A, B and C are
repeaters.
The maximum number of hops (the repeaters between a wireless client and the root AP) you can have
in a ZyMesh varies according to how many wireless clients a managed AP can support.
Note: A ZyMesh link with more hops has lower throughput.
Note: When the wireless connection between the root AP and the repeater is up, in order to
prevent bridge loops, the repeater would not be able to transmit data through its
Ethernet port(s). The repeater then could only receive power from a PoE device if you
use PoE to provide power to the managed AP via an 8-ping Ethernet cable.
21.1.1 What You Can Do in this Chapter
The ZyMesh Profile screen (Section 21.2 on page 285) creates preset ZyMesh configurations that can be
used by the NXC.
21.2 ZyMesh Profile
This screen allows you to manage and create ZyMesh profiles that can be used by the APs. To access
this screen, click Configuration > Object > ZyMesh Profile.
To Next Page
Loading...
