Chapter 29 System
NXC Series User’s Guide
374
The following table describes the labels in this screen.
29.14 IPv6
Click Configuration > System > IPv6 to open the following screen. Use this screen to enable IPv6 support
on the NXC.
Figure 230 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 183 Configuration > System > Language
LABEL DESCRIPTION
Language Setting Select a display language for the NXC’s Web Configurator screens. You also need to open a
new browser session to display the screens in the new language.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
Table 184 Configuration > System > IPv6
LABEL DESCRIPTION
Global Setting
Enable IPv6 Select this to have the NXC support IPv6 and make IPv6 settings be available on the screens
that the functions support, such as the Configuration > Network > Interface > Ethernet, and
VLAN screens. The NXC discards all IPv6 packets if you clear this check box.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
