EasyManua.ls Logo

ZyXEL Communications NXC Series - Add;Edit VLAN

ZyXEL Communications NXC Series
530 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9 Interfaces
NXC Series User’s Guide
161
9.3.2 Add/Edit VLAN
This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP settings,
and connectivity check for each VLAN interface. To access this screen, click the Add icon at the top of
the Add column or click an Edit icon next to a VLAN interface in the VLAN Summary screen. The
following screen appears.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Object
References
Select an entry and click Object References to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with any interface.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
IP Address This field displays the current IP address of the interface. If the IP address is 0.0.0.0 (in the IPv4
network) or :: (in the IPv6 network), the interface does not have an IP address yet.
In the IPv4 network, this screen also shows whether the IP address is a static IP address (STATIC)
or dynamically assigned (DHCP).
In the IPv6 network, this screen also shows whether the IP address is a static IP address (STATIC),
link-local IP address (LINK LOCAL), dynamically assigned (DHCP), or an IPv6 StateLess Address
AutoConfiguration IP address (SLAAC). See Appendix E on page 502 for more information
about IPv6.
VID This field displays the VLAN ID number.
Member This field displays the Ethernet interface(s) that is a member of this VLAN.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
Table 69 Configuration > Network > Interface > VLAN (continued)
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications NXC Series

Related product manuals