Chapter 8 Wireless
NXC Series User’s Guide
139
Click Configuration > Wireless > AP Management > Firmware to access this screen.
Figure 74 Configuration > Wireless > AP Management > Firmware
Each field is described in the following table.
Table 60 Configuration > Wireless > AP Management > Firmware
LABEL DESCRIPTION
AP Firmware
Runtime Firmware This displays the latest AP firmware version currently on the NXC. The NXC must have the
latest AP firmware to manage all supported APs.
Available Firmware This field displays if there is a later AP firmware version available on the firmware server. It
displays N/A if the NXC cannot connect with the firmware server. Check that the NXC has
Internet access if N/A displays and then click the Check button below.
If a newer NXC AP firmware is available, its version number displays here.
Last Check Success This displays the date and time the last check for new firmware was made and whether the
check is in progress (Checking), was successful (Success), or has failed (Fail).
Check Click this button to have the NXC display the latest AP firmware version available on the
firmware server.
Apply AP Firmware Due to space limitations, the NXC only downloads and keeps AP firmware for APs that are
already in the firmware list below. If you connect a new AP to the NXC, the NXC may need
to download a new AP firmware. Please wait while downloading new firmware as the
speed depends on your Internet connection speed. Make sure to maintain the Internet
connection while downloading new firmware.
Apply Click this to download newer Available Firmware from the firmware server and update the
Runtime Firmware version.
# This is an index number of a managed AP.
Model This displays the name of all manageable AP models.
To Next Page
Loading...
