ZyXEL Communications NXC Series - Page 181

Chapter 10 Policy and Static Routes
NXC Series User’s Guide
181
Figure 95 Configuration > Network > Routing > Policy Route > Add/Edit
The following table describes the labels in this screen.
Table 76 Configuration > Network > Routing > Policy Route > Add/Edit
LABEL DESCRIPTION
Show / Hide
Advanced
Settings
Click this button to display a greater or lesser number of configuration fields.
Create new
Object
Use this to configure any new settings objects that you need to use in this screen.
Configuration
Enable Select this to activate the policy.
Description Enter a descriptive name of up to 60 printable ASCII characters for the policy.
Criteria
User Select a user name or user group from which the packets are sent.
Incoming Select where the packets are coming from; any, an interface, or the NXC itself
(EnterpriseWLAN). For an interface, you also need to select the individual interface.
Please select one
member
This field displays only when you set Incoming to Interface. Select an interface from which the
packets are sent.
Source Address Select a source IP address object from which the packets are sent.
Destination
Address
Select a destination IP address object to which the traffic is being sent.