Chapter 18 User/Group
NXC Series User’s Guide
249
Limit the number
of simultaneous
logons for
administration
account
Select this check box if you want to set a limit on the number of simultaneous logins by
admin users. If you do not select this, admin users can login as many times as they want at
the same time using the same or different IP addresses.
Maximum
number per
administration
account
This field is effective when Limit ... for administration account is checked. Type the maximum
number of simultaneous logins by each admin user.
Limit the number
of simultaneous
logons for access
account
Select this check box if you want to set a limit on the number of simultaneous logins by non-
admin users. If you do not select this, access users can login as many times as they want as
long as they use different IP addresses.
Maximum
number per
access account
This field is effective when Limit ... for access account is checked. Type the maximum
number of simultaneous logins by each access user.
User Lockout Settings
Enable logon
retry limit
Select this check box to set a limit on the number of times each user can login
unsuccessfully (for example, wrong password) before the IP address is locked out for a
specified amount of time.
Maximum retry
count
This field is effective when Enable logon retry limit is checked. Type the maximum number of
times each user can login unsuccessfully before the IP address is locked out for the specified
lockout period. The number must be between 1 and 99.
Lockout period This field is effective when Enable logon retry limit is checked. Type the number of minutes
the user must wait to try to login again, if logon retry limit is enabled and the maximum retry
count is reached. This number must be between 1 and 65,535 (about 45.5 days).
Dynamic Guest Settings
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove it
before doing so. Removing a group does not remove the user accounts in the group.
Object References Select an entry and click Object References to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with a specific user group.
Group Name This field displays the name of each dynamic guest group.
Description This field displays the description for each dynamic guest group.
Miscellaneous Settings
User name &
Password Length
Specify the length of a user name and password for dynamic guest accounts.
Account Deleted
After Expiration
Select this check box to remove the dynamic guest accounts from the Monitor > System
Status > Dynamic Guest screen when they expire.
Dynamic Guest Note Enter the notes (such as the SSID and security key the dynamic guests can use to access the
network services) you wan to display in the paper along with the account information you
print out for dynamic guest users. You can enter up to 1024 ASCII characters.
Apply Click Apply to save the changes.
Reset Click Reset to return the screen to its last-saved settings.
Table 114 Configuration > Object > User/Group > Setting (continued)
LABEL DESCRIPTION
To Next Page
Loading...
