Chapter 29 System
NXC Series User’s Guide
348
Figure 207 Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 173 Configuration > System > WWW > Service Control
LABEL DESCRIPTION
HTTPS
Enable Select the check box to allow or disallow the computer with the IP address that matches
the IP address(es) in the Service Control table to access the NXC Web Configurator using
secure HTTPs connections.
Server Port The HTTPS server listens on port 443 by default. If you change the HTTPS server port to a
different number on the NXC, for example 8443, then you must notify people who need to
access the NXC Web Configurator to use “https://NXC IP Address:8443” as the URL.
Authenticate Client
Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to authenticate
itself to the NXC by sending the NXC a certificate. To do that the SSL client must have a
CA-signed certificate from a CA that has been imported as a trusted CA on the NXC.
Server Certificate Select a certificate the HTTPS server (the NXC) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the My Certificates screen.
Redirect HTTP to HTTPS To allow only secure Web Configurator access, select this to redirect all HTTP connection
requests to the HTTPS server.
To Next Page
Loading...
