Chapter 32 Diagnostics
NXC Series User’s Guide
403
Figure 245 Maintenance > Diagnostics > Collect on AP
The following table describes the labels in this screen.
Table 196 Maintenance > Diagnostics > Collect on AP
LABEL DESCRIPTION
Diagnostics Collect Status
Status This shows Standby when the NXC is ready to or have finished generating a diagnostic file.
This shows Busy on AP when the NXC is generating a diagnostic file for the selected managed
AP(s).
This shows Busy on Controller when the NXC is generating a diagnostic file containing its own
configuration and diagnostic information.
Progress This shows the number of managed APs whose configuration has been contained in the file and
the number of managed APs you selected to generate a diagnostic file.
AP General Setting
Available APs This text box lists the managed APs that are connected and available. Select the managed APs
that you want the NXC to generate a diagnostic file containing their configuration, and click the
right arrow button to add them.
To Next Page
Loading...
