Chapter 32 Diagnostics
NXC Series User’s Guide
409
Figure 248 Maintenance > Diagnostics > Packet Capture > Capture on AP
The following table describes the labels in this screen.
Table 199 Maintenance > Diagnostics > Packet Capture > Capture on AP
LABEL DESCRIPTION
AP General Setting
Select on AP This lists the managed APs that are connected and available. Select the managed AP
that you want the NXC to capture network traffic going through it.
Query After you select an AP, click this button to update and display the interfaces, filter
configuration and storage size available for the selected AP in the screen.
Note: You need to use the Query button before packet capturing on an AP if
the AP has rebooted or the applied AP profile settings have been
changed.
To Next Page
Loading...
