ZyXEL Communications NXC Series - Page 438

Appendix A Log Descriptions
NXC Series User’s Guide
438
Table 209 User Logs
LOG MESSAGE DESCRIPTION
%s %s from %s has
logged in
EnterpriseWLAN
A user logged into the NXC.
1st %s: The type of user account.
2nd %s: The user’s user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS, FTP, Telnet, SSH, or
console).
%s %s from %s has
logged out
EnterpriseWLAN
A user logged out of the NXC.
1st %s: The type of user account.
2nd %s: The user’s user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS, FTP, Telnet, SSH, or
console).
%s %s from %s has been
logged out
EnterpriseWLAN (re-auth
timeout)
The NXC is signing the specified user out due to a re-authentication timeout.
1st %s: The type of user account.
2nd %s: The user’s user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS, FTP, Telnet, SSH, or
console).
%s %s from %s has been
logged out
EnterpriseWLAN (lease
timeout)
The NXC is signing the specified user out due to a lease timeout.
1st %s: The type of user account.
2nd %s: The user’s user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS, FTP, Telnet, SSH, or
console).
%s %s from %s has been
logged out
EnterpriseWLAN (idle
timeout)
The NXC is signing the specified user out due to an idle timeout.
1st %s: The type of user account.
2nd %s: The user’s user name.
3rd %s: The name of the service the user is using (HTTP, HTTPS, FTP, Telnet, SSH, or
console).
Console has been put
into lockout state
Too many failed login attempts were made on the console port so the NXC is
blocking login attempts on the console port.
Address %u.%u.%u.%u has
been put into lockout
state
Too many failed login attempts were made from an IP address so the NXC is
blocking login attempts from that IP address.
%u.%u.%u.%u: the source address of the user’s login attempt
Failed login attempt to
EnterpriseWLAN from %s
(login on a lockout
address)
A login attempt came from an IP address that the NXC has locked out.
%u.%u.%u.%u: the source address of the user’s login attempt
Failed login attempt to
EnterpriseWLAN from %s
(reach the max. number
of user)
The NXC blocked a login because the maximum login capacity for the
particular service has already been reached.
%s: service name
Failed login attempt to
EnterpriseWLAN from %s
(reach the max. number
of simultaneous logon)
The NXC blocked a login because the maximum simultaneous login capacity
for the administrator or access account has already been reached.
%s: service name