Appendix A Log Descriptions
NXC Series User’s Guide
447
Interface %s ping
check is disabled.
Zone Forwarder adds
DNS servers in
records.
Ping check disabled, add DNS servers in bind.
%s is interface name
Wizard apply DNS
server failed.
Wizard apply DNS server failed.
Wizard adds DNS server
%s failed because DNS
zone setting has
conflictd.
Wizard apply DNS server failed because DNS zone conflicted.
%s is the IP address of the DNS server
Wizard adds DNS server
%s failed because Zone
Forwarder numbers have
reached the maximum
number of 32.
Wizard apply DNS server fail because the device already has the maximum
number of DNS records configured.
%s is IP address of the DNS server.
Access control rules
of %s have reached the
maximum number of %u
The maximum number of allowable rules has been reached.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
%u is the maximum number of access control rules.
Access control rule %u
of %s was appended.
A new built-in service access control rule was appended.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was inserted.
An access control rule was inserted successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was modified.
An access control rule was modified successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %u
of %s was deleted.
An access control rule was removed successfully.
%u is the index of the access control rule.
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
Access control rule %d
of %s was moved to %d.
An access control rule was moved successfully.
1st %d is the previous index .
%s is HTTP/HTTPS/SSH/SNMP/FTP/TELNET.
2nd %d is current previous index.
SNMP trap can not be
sent successfully
Cannot send a SNMP trap to a remote host due to network error
Table 213 Built-in Services Logs (continued)
LOG MESSAGE DESCRIPTION
To Next Page
Loading...
