Chapter 3 The Web Configurator
NXC Series User’s Guide
46
Working with Lists
When a list of available entries displays next to a list of selected entries, you can often just double-click
an entry to move it from one list to the other. In some lists you can also use the [Shift] or [Ctrl] key to
select multiple entries, and then use the arrow button to move them to the other list.
Figure 19 Working with Lists
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Object References Select an entry and click Object References to open a screen that shows which settings use
the entry.
Move To change an entry’s position in a numbered list, select it and click Move to display a field to
type a number for where you want to put that entry and press [ENTER] to move the entry to
the number that you typed. For example, if you type 6, the entry you are moving becomes
number 6 and the previous entry 6 (if there is one) gets pushed up (or down) one.
Table 17 Common Table Icons (continued)
LABEL DESCRIPTION
To Next Page
Loading...
