Chapter 5 Dashboard
NXC Series User’s Guide
60
The following table describes the labels in this screen.
Table 18 Dashboard
LABEL DESCRIPTION
Widget Settings (A) Use this link to re-open closed widgets. Widgets that are already open appear grayed out.
Arrow (B) Click this to collapse or expand a widget.
Refresh Time Setting
(C)
Set the interval for refreshing the information displayed in the widget.
Refresh Now (D) Click this to update the widget’s information immediately.
Close Widget (E) Click this to close the widget. Use Widget Settings to re-open it.
Virtual Device Hover your cursor over a LED or connected Ethernet port to view details about the status of
the NXC’s LEDs and connections. See Section 2.5.3 on page 30 for LED descriptions. An
unconnected interface appears grayed out.
The following labels display when you hover your cursor over a connected interface.
Name This field displays the name of the interface or slot.
Status This field displays the current status of each interface or device installed in a slot. The
possible values depend on what type of interface it is.
Inactive - The Ethernet interface is disabled.
Down - The Ethernet interface is enabled but not connected.
Speed / Duplex - The Ethernet interface is enabled and connected. This field displays the
port speed and duplex setting (Full or Half).
Zone This field displays the zone to which the interface is currently assigned.
IP Address/Mask This field displays the current IP address and subnet mask assigned to the interface.
System Resources
CPU Usage This field displays what percentage of the NXC’s processing capability is currently being
used. Click the CPU Usage link to display a chart of the NXC’s recent CPU usage.
Flash Usage This field displays what percentage of the NXC’s onboard flash memory is currently being
used.
Memory Usage This field displays what percentage of the NXC’s RAM is currently being used. Click the
Memory Usage link to display a chart of the NXC’s recent memory usage.
Session This field displays how many traffic sessions are currently open on the NXC. These are the
sessions that are traversing the NXC. Hover your cursor over this field to display icons. Click
the Session link to display a chart of NXC’s recent session usage.
System Status
System Uptime This field displays how long the NXC has been running since it last restarted or was turned
on.
Current Date/
Time
This field displays the current date and time in the NXC. The format is yyyy-mm-dd hh:mm:ss.
Click the link to open the screen where you can configure the NXC’s date and time.
DHCP Table This field displays the number of IP addresses the NXC has assigned via DHCP. Click the link
to look at the IP addresses currently assigned to the NXC’s DHCP clients and the IP
addresses reserved for specific MAC addresses.
Current Login
User
This field displays the user name used to log in to the current session, the amount of
reauthentication time remaining, and the amount of lease time remaining.
Number of Login
Users
This field displays the number of users currently logged in to the NXC. Click the link to pop-
open a list of the users who are currently logged in to the NXC.
To Next Page
Loading...
