XGS4700-48F User’s Guide
105
CHAPTER 8
Basic Setting
This chapter describes how to configure the System Info, General Setup,
Switch Setup, IP Setup and Port Setup screens.
8.1 Overview
The System Info screen displays general Switch information (such as firmware
version number) and hardware polling information (such as fan speeds). The
General Setup screen allows you to configure general Switch identification
information. The General Setup screen also allows you to set the system time
manually or get the current time and date from an external server when you turn
on your Switch. The real time is then displayed in the Switch logs. The Switch
Setup screen allows you to set up and configure global Switch features. The IP
Setup screen allows you to configure a Switch IP address in each routing domain,
subnet mask(s) and DNS (domain name server) for management purposes. The
Port Setup screen allows you to enable or disable a port on the Switch and
configure the port settings, such as the speed and duplex mode.
To Next Page
Loading...
